How To Rekey Defiant Knob

The $12.95 DEFIANT® (5 pin key cylinder system) rekey kit by CHANGE-A-LOCK®, contains everything necessary (except for a common screwdriver to rekey your own Entrance, Single & Double cylinder Deadbolts and Handleset type locks. The kit will rekey 6 single cylinder locks.

Each lock you put a key in is a single cylinder. A deadbolt keyed on both sides would count as 2 single cylinder locks.If you buy 2 or more rekey kits and want them keyed the same please email me at david@changealock.com EACH KIT CONTAINS: Two precut keys, 6 sets of color coded pins for rekeying single and/or double cylinder locks (not exceeding six (6) cylinders). NOTE: To order EXTRA PIN SETS and/or EXTRA KEYS for your rekey kit please click on the desired rekey product list. Detailed step by step instructions in both ENGLISH and SPANISH is included in each CHANGE-A-LOCK rekey kit.

All special rekeying tools are included. All you may need is a common screwdriver to remove lock from door. This rekeying kit is designed to be used only with DEFIANT® locks which must have the screw-off-cylinder-cap; if you have DEFIANT® lock with a pry off cylinder cap do not use rekey kit. New DEFIANT deadbolts have a cap that looks like a pry off cap and a shaft but it has a snap ring below the cap which needs to be removed. Then use follower to place over shaft next to cap and push out cylinder. Instructions for the DEFIANT® keyed lever entrance lock is not available from CHANGE-A-LOCK®. This rekey kit is not designed to work with any other manufactured locks.

• Kit Type: Rekeying Kit. Kit, Part, & Accessory Type: Lock Kits. We do our best to process as quickly as possible. In the case of factory defects, we will replace the.
• Aug 06, 2014  Kung Fu Maintenance shows how to rekey take out cylinder for shields security defiant other release pin type handle locks video. Get the new album 'Up Beat' on Itunes.

Note: You must use the keys provided in rekey kit for rekeying. Pins match keys in kit and are not to be used to rekey with any other keys! NOTE: OLD KEY is needed to take out cylinder plug then new key is used to rekey lock.

Defiant locks are not nearly as common as the Kwikset or Schlage locks, but it seems that they’re becoming more widespread in recent years. If you want to jump straight to the conclusion – click here. Kwikset Smart Key Rekey kit 2 Keys Rekey Tool Instructions and additional keys. New (Other) $10.00 to $25.00. Cameron Venetian Bronze Entry Knob Lock With Smart Key Rekeying 6 Way See more like this. Kwikset 83262-001 SMT SmartKey CP Rekeying Kit - Carded.

Old keys can not be used to rekey locks using the CHANGE-A-LOCK rekey kit for the cylinder pins will not work with old key. ALERT: WHAT TO DO IF KEY CAN NOT BE REMOVED AFTER LOCK HAS BEEN RE-KEYED. If your key cylinder has a screw-off end cap, tighten or loosen one or two notches at a time until you are able to remove key. If this does not work or if your lock cylinder does not have a screw-off end cap then refer to master keyed locks below. MASTER KEYED LOCK: Your lock may have been master keyed at one time.

Select it, start to use and you can control back from your PC.RotationThe sender can support rotation. Mirrorop sender download. Launch the Android MirrorOp Sender and it will search the windows receiver.5. The app's orientation is the mirror orientation on the receiver side. Open the Windows Receiver.4.

If key can not be removed once lock has been rekeyed, then remove the key cylinder again using the follower. Remove the follower to let the top pins and springs drop out of cylinder housing.

If lock has been master keyed you will have more than 5 top pins for a 5 pin cylinder lock system. Refer to the directions on how to replace the 5 top pins of equal length and the 5 springs. Do not use the other pins which drop out of the cylinder housing! If you have a 6 pin key cylinder system then replace the 6 pins of equal length and the 6 springs.

Have you ever given someone a key to something but then later on decided it wasn't such a good idea and you fear that they have copied it, I recently had that problem. There are plenty of lock smiths that will re-key a lock for a fee or you could go out and buy a new door knob. I was running low on cash and decided to take the knob apart and see if there was a way to change the pins (and my key) in a way that the original key wouldn't work. This is my first instructable and is based on what I did. But first, I am NOT responsible for any damage you do to your door knob.

On my particular brand of door knob the lock mechanism is only held in by a decorative ring and is easily slid off to remove the lock. Also remember how it came out although it should only fit one way. Once its out, test it and see how it works. Basically the key goes in and each tooth on the key pushes a different pin in the lock to a specified height so that they all align and the barrel can turn freely.

There are plenty of sites that explain this much better than I can,. If you open the link for this step keep it open for the next step too. Now comes the more confusing part. At least one of the pins has to be changed in order for the original key not to work, since you cant add metal to the key you have to add metal to a pin, there are two options; make a longer pin to go into the lock mechanism or 'steal' a longer pin from a different part of the lock. I gave it a lot of thought and finally decided to steal the longest pin in the mechanism and use it to replace the shortest pin. Its really difficult to explain, first remove the metal cap that holds all of the springs in the mechanism, the springs fly so do this carefully.

Before you go and remove any of the pins take a look at the key you plan on modifying. There will be a series of ridges, one for each hole.

Pick the highest and the lowest ridge on the key and figure out which pins sit in those two ridges. Remove the pins and the spring in the hole that corresponds with the highest ridge on the key, put the contents of it off to the side.

Now replace everything you just took out with the contents of the hole that corresponds with lowest ridge on the key. So you want to end up with one completely empty hole and one hole that has a different set of pins in it, in addition to all of the pins you didn't mess with. Once you have done this make sure the pins don't fall out and put it to the side.

If it is still unclear there is a diagram on the next page. All you have to do to the key is make it work in the lock. If you followed the last step only one ridge on the key has to be modified, I drew an example. In the picture the red vertical on the key is the highest ridge and the green vertical is one of the lowest ridges. The green pin is moved to the red ridge which is then filed down to the same height as the green ridge on the key. Your key will most likely be different. When filing down your 'red ridge' make sure is is exactly the same height as your 'green ridge', also make sure the transitions to the ridges around your 'red ridge' are slanted enough so that the pins don't get stuck.

I used a nail file to file down the key so I wouldn't mess up with my dremel tool, but feel free to use what ever you have on hand. Once you have ground down the key you can dispose of everything that came out of the now empty hole in the lock mechanism, those pieces wont work anymore.